ARGOX A-200 TI DRIVER

This digital apparatus does not exceed the Class B limits for radio noise for digital apparatus set out on the Radio Interference Regulations of the Canadian Department of Communications. Do not connect this pin if you are using a general host like a PC. Key requirement of transportation and logistics is to put the right goods to the right place on time. Cleaning the media compartment Clean the media compartment with a soft cloth moistened with a mild detergent. Many commercially available print head cleaning kits are also available.

Uploader:	Meztilrajas
Date Added:	11 August 2007
File Size:	40.56 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	95385
Price:	Free* [*Free Regsitration Required]

Open the Side Access Door by lifting it up and to the left.

N always byte 5: Pin 9 is reserved for factory use only. Open the print head module by pushing the Head Latch toward the rear of the printer. Kumhar Gali, Indore No. If data is transmitted to both ports simultaneously, it will cause the data in the received buffer to be corrupted.

Argox A Barcode Printer

Ribbon Replace the ribbon Not for direct sensor error sensor thermal. Connecting the Printer to Your Computer 6 Section 2: Connect the Centronics-type parallel side of the cable to the printer. Performs "self test" and prints out the configuration report.

If not, select LPT. Applying Power 6 E. A-2200 is the Barcode.

The container should stay right side up. Road, Indore - ,Madhya Pradesh.

Argox A-200

Cleaning the media compartment Clean the media compartment with a soft cloth moistened with a mild detergent. C - feeds labels out the front.

Check the active printer driver, x-200 should be Label Dr. Check for any traces of black color or adhesive on the cotton after cleaning. Consider the distance between host and printer for the communication cable serial or parallel cable. Label Sensor Calibration 13 D. Command Language Quick Reference A. Make sure that all supplied accessories are included with your unit.

Presented series is designed and developed by employees engaging high grade components as per the industry set norms and values.

Speed baud rate Data format 1 start bit, 8 data bits and 1 stop bit. Point of Sale Terminal. T'2' -'3' -'4' -'5' -'6' -'7 - Performing a Self Test 13 E. When you use the Windows printer driver, all fonts, graphics, bar codes and other label data are received in graphics bit-map mode from the PC, interpreted by the printer driver, and printed.

Argox A-200 Barcode Printer

Push the roll all the way to the inside of the printer and push the Label Supply Guide snugly against the outside of the label roll. The sizes are 6, 8, 10, 12, 14 and 18 points. We are here to help!

Ribbon jam Fix the jam Not for direct thermal. Press and hold the FEED button.

Open the Side Access Door by lifting it up and to the left and open the Front Access Door by pulling it forward and dropping it down.